Changing presser foot, Presser foot types, Presser foot lifter – Kenmore 385.15208 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing Presser Foot

Lever

(DOroove
(DPin

® To remove

Turn the handwheel toward you to raise the needle to its
highest position. Raise the presser foot

Press the lever

Cl)on

the back of the foot holder. The

presser foot will drop off.

» To attach

Place the presser foot so that the pin (|)on the foot lines
up directly below the groove (2)of the foot holder
Lower the foot holder to lock the foot in place.

Presser Foot Types

« Zigzag foot

Use this foot for both straight and
For: Straight stitch

Topstitching

Basic zigzag
Satin stitching
Monogramming
Applique
Bar tacking
Button sewing
Overcasting stitch

* Multiple zigzag stitch
* Blind hem stitch
* Lace work
* Shell stitch
* Decorative stitch patterns

Twin needle stitch

(*Model 15208 exclusive)

zigzag stitching,

(page 32)
(page 34)
(page 40)

(page 40)
(page 42)
(page 42)
(page 44)
(page 44)
(page 46)
(page 46)
(page 48)
(page 48)
(page 50)
(page 50)
(page 52)

Sliding buttonhole foot

Use this foot for manual buttonhole making, it is marked
to help you measure a buttonhole accurately.

For: Buttonhole sewing

(page 54)

«Zipper foot

(Model 15208 exclusive)

The edge of the foot guides the zipper and keeps the
seam straight.

For:Zipper sewing

(page 34)

»Straight stitch foot

(Mode! 15208 exclusive)

Use this foot exclusively for straight stitching with the

center needle position

For: Straight stitch

(page 32)

Topstitching

(page 34)

f ‘ d