Kenmore 385.15208 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

' Inserting bobbin

Q] Place a bobbin in the bobbin case, making sure the

thread feeds clockwise from the bobbin.

[11

Draw the thread through the slot of the case.

[|] Continue to draw the thread under the tension spring (|)

and through the opening..

Pull out about 4” (10 cm) of thread.

0 Tension spring

0 Holding the latch open, position the bobbin case into the

shuttle, and then release the latch.

[|]The case should lock into the place when the latch is

released.