ALTANA Auto-Chart - Manual (Page 37)

Edit Standard
This function allows to define the settings of a new or an existing standard. Select the
required option:
Create new standard:
When selecting a new standard a dialog box will ask you to enter the "Standard Name".
Thereafter, the "Edit Standard" Window is displayed.
The left side of the window consists of the following information:
- Standard name and Date /Time
(16) .
- Tolerance method, display angles, illuminant and color system (17) .
- Effect scales (18)
- Statistic (19) : Define number of readings for statistic (n
Standard
and n
sample
) or select
"SMC" which uses as the minimum number of readings the values n
Standard
and n
sample
.
The maximum number of readings is set to 20.
- Display options
(20) for special indices (flop difference and maximum difference).
- Sample Temperature Alarm (21) to warn, if the sample temperature is out of the defined
temperatur range.