ALTANA Auto-Chart - Manual (Page 28)

3. Filter name: Structure_DarkMetallic_Vertical
Color: Select all dark metallic colors
Check zones: Select the individual vertical check zones
4. Filter name: Structure_LiteMetallic_Vertical
Color: Select all dark metallic colors
Check zones: Select the individual vertical check zones
Note:
In this report you also have a "Grouping" function. The first time the "Grouping" should be
set to "none". Thus, every data point will be the average of the horizontal or vertical zones
of one vehicle - good measure for process stability.
For further analysis, the grouping can be done by e.g.:
- Model: Shows influence of design
- Color: Shows influence of the paint material
- Paint line: Influence of process
- Checkzone etc.
The structure chart can be displayed with the results of 2 or 4 filters on one page, an icon
for the desired report can be selected accordingly. In addition, a table is included with the
numerical data of the selected scales.
This report will also graph the entire "Structure Spectrum" for detailed material and
process analysis: