Cal command (calibration with internal mass), Error code – A&D Weighing GH-252 User Manual
Page 69
67
CAL command (Calibration with internal mass)
Computer Time
Balance
CAL command
Zero display
Command received
Command completed
Zero display
Error code
This example is of an error using the R command. "
erCd 1
" is used. The balance transmits an
error code when the received command can not be achieved.
Computer Time
Balance
R command
CAL command
Weighing mode (unstable)
Command received
In process
When the R command can not be
achieved due to unstable weighing:
Error code
When the CAL command is received,
the balance returns to the weighing
mode
Command completed
Weighing mode