Kistler-Morse KM L-Cell Bolt-On - Manual (Page 82)

Appendix F. Spare Parts Recommendations
F-1
Appendix F. Spare Parts
Recommendations
K-M recommends you purchase and maintain the following minimum number
of spare parts/tools for your L-Cell system:
1 Extra per Vessel
•
L-Cell Sensor, each complete with:
Sensor
Environmental Cover
#6-32 socket head cap screws (3)
1 Extra per Plant
•
T-handle driver
• Sikaflex 1A polyurethane sealant
or Dow Corning RTV 739 or RTV 738
• Kistler-Morse Test Meter
CAUTION
Only use Sikaflex 1A polyurethane sealant or Dow Corning RTV 739
or RTV 738. Other sealants may contain acetic acid, which is harmful
to sensors and electronics.
Spare Parts for L-Cell
Spare Parts for Microcell
K-M recommends you purchase and maintain the following minimum number
of spare parts/tools for your Microcell system:
1 Extra per Vessel
•
Microcell Sensor, each complete with:
Sensor
Environmental Cover
#8-32 socket head cap screws (2)
#8 hardened flat washers (2)
1 Extra per Plant
•
T-handle driver
• Sikaflex 1A polyurethane sealant or
Dow Corning RTV 739 or RTV 738
• K-M Test Meter
CAUTION
Only use Sikaflex 1A polyurethane sealant or Dow Corning RTV 739
or RTV 738. Other sealants may contain acetic acid, which is harmful
to sensors and electronics.