KEYENCE SK-H Series - Manual

1 E SK-H
Handheld Static Sensor
SK-H Series
Instruction Manual
Introduction
This manual describes the operations of and information related to the SK Series.
Read this manual carefully to ensure the safe performance and function of the SK
Series.
Keep this manual in a safe place for future reference.
Ensure that the end user of this product receives this manual.
„ Symbols
The following symbols are used in this instruction manual to enable you to
recognize important information at a glance.
Be sure to read this section carefully.
Important Indicates cautions and limitations that must be followed during
operation.
Point Indicates additional information on proper operation.
Reference
Indicates tips for better understanding or useful information.
Indicates the reference pages in this manual or the reference pages in sepa-
rate manuals.
Read this instruction manual before using the product in order to achieve
maximum performance.
Keep this manual in a safe place after reading it for future reference.
DANGER
Indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
NOTICE
Indicates a situation which, if not avoided, could result in product
damage as well as property damage.
96M13445
Table of Contents
Introduction .......................................................................................1
Safety Precautions ......................................................................................... 2
Precautions for Use........................................................................... 2
Precautions on Regulations and Standards ................................................... 3
1.Before Use................................................................................................... 3
Checking the Package Contents.......................................................3
Options .............................................................................................. 3
PC Application Software for the SK-H ............................................... 3
Part Names and Functions ................................................................ 4
Names of Parts of the Display ........................................................... 4
Preparing for Measurements.............................................................4
2.Operation Menus and Measurement Procedures........................................ 5
Setup Screen..................................................................................... 5
Procedure for Measuring Charge Potential....................................... 6
Measurement Procedure in Charge Plate Monitor Mode.................. 7
3.Specifications .............................................................................................. 8
Specifications ....................................................................................8
Dimensions........................................................................................ 8
4.Appendix...................................................................................................... 9
Error Messages and Corrective Actions ........................................... 9