KEYENCE LK-G5000 Series - Manual (Page 9)

9
Measurement/Tolerance-Measurement type
Measurement/Tolerance-Filter
Measurement/Tolerance - Tolerance Evaluation
Selects which of the following targets will be measured in “Measurement type”.
Displacement/Speed/Acceleration
Settings related to measurement value processing are performed in Filter. By setting the moving average, it is possible to stabilise
measurement values.
Can set the evaluation values for the allowable measurement value range. The upper/lower limit values are set so that a signal is
output from the controller when the measurement values exceed these values.
The measurement values are set with a moving average in the range of 1 to 262144 times.
When an average of 4x has been set, the following process will occur.
Internal data
Outputs the average of Data 1 to 4 as Data A.
Outputs the average of Data 2 to 5 as Data B.
Outputs the average of Data 3 to 6 as Data C.
Sampling cycle
Average
measuring time
Average
measuring time
Average
measuring time