COP-USA NVMS 1000 - Manual (Page 43)

40
NVMS-1000 User Manual
8.4 Alarm Preview
The interface of alarm preview will automatically pop up if the relevant alarm page and alarm preview have been
already configured.
8.4.1 Alarm Preview Configuration
 Motion Detection Alarm: In the control panel, click “Change Camera Settings” under Device to enter the
interface. Select a camera, and then click “System trigger” shortcut under Motion Detection Alarm Settings to
appear a window; click
【Trigger the Big Screen】 button under system linkage to select channel.
 Video Loss Alarm: Click “Video Loss of System” to enter the interface; click 【Trigger the Big Screen】
button under System Linkage to select channel.
 Sensor Alarm: In the control panel, click “Alarm Management” to enter the interface. Click
button to add the associated preview cameras.
In the control panel, click ― Change Alarm Preview
Settings” under Live Preview to pop up the window
① Alarm preview will pop up automatically when alarm
is triggered if checking ―Automatic Pop-up Alarm
Page‖.
② Alarm preview will pop up automatically in full screen
when alarm if triggered if checking ―Full Screen
Display When Popping Up‖.
③ Choose a display monitor from the ―Full Screen
Display‖ drop-down menu. The alarm image will
display on the designated monitor when alarm is
triggered.
④ Choose the number of screen.
8.4.2 Alarm Preview
After configuring the alarm, the alarm preview will automatically pop up if the alarm of selected channels is
triggered. The default pop-up window of system is independent interface. Please refer to the below figure.