Create, change or delete group dwell scheme, Create scheme, Change and delete group dwell scheme – COP-USA NVMS 1000 User Manual
Page 24: 3 create, change or delete group dwell scheme
21
NVMS-1000 User Manual
to add the selected cameras to the group on the right.
③ Check cameras on the right, then click
button to remove them from the group.
4.3 Create, Change or Delete Group Dwell Scheme
Scheme is used for dwelling group by group. Therefore, at least one group should be created. Click “Change or
Delete the Group Dwell Scheme” on the left side of the menu to enter the interface as below.
4.3.1 Create Scheme
Click
button to create a scheme.
The added scheme will be displayed in the scheme list.
4.3.2 Change and Delete Group Dwell
Scheme
Select a scheme in the scheme list, click
button to delete it.
Select a scheme and click
button to
enter the interface. You can change the name of scheme
and the dwell time interval.