COP-USA NVMS 1000 - Manual (Page 42)

39
NVMS-1000 User Manual
Click ―Set the Motion Alarm‖ to enter the interface as
right.
Click “System Trigger” to enter the interface as shown on
the right.
Please refer to section 3.3.2 for details.
8.3 Video Loss Alarm
In the control panel, click “Area & Camera Management”
under Device.
Click “Video Loss” to enter the interface. The steps of
configuring video loss are same with the device settings,
please refer to the video loss chapter of device user manual.
Choose a camera and click ―Video Loss of System‖ to
enter the interface.
Please refer to section 3.3.2 for details.