COP-USA NVMS 1000 - Manual (Page 11)

8
NVMS-1000 User Manual
3 Device Management
In the control panel, click icon to enter the device management interface.
3.1 Add Device
Click button to enter the interface.
① Select device type and input device name;
② Input IP address or domain, port of the device, then
input its user name and password.
③ Create an area. If you haven’t created area, you can
click ―Create a New Area‖ to create.
④ Check ―Upload bandwidth more than 2M‖ according to
the actual network situation. Checking or not checking
it will affect the stream choice of live preview.
Note: You can click ―Create an Area‖ shortcut menu under Device to create an area in the control panel.
You can also check ―Auto report‖ to add device. The setting steps are as follows:
 Choose the device type and check ―Auto‖.
 Input device name.
 If you want to add DVR, please enter NetworkSever tab from device. Check ―Enable‖, input IP address
and port(2009) of NVMS-1000 & device ID.
 If you want to add IP camera, please enter Network Configuration  ECMS Configuration. Check ―Do you