Record management, Manual record, Schedule record – COP-USA NVMS 1000 User Manual

Page 32: 6 record management, 1 manual record, 2 schedule record

NVMS-1000 User Manual

6 Record Management

NVMS-1000 supports manual record, schedule record, motion detection record and sensor alarm record. This
chapter will introduce the above four record types respectively.

6.1 Manual Record

Select a channel and click

button or right click to choose ―Open Manual Recording‖ to start recording.

Then click

button or right click to choose ―Close the Manual Recording‖

to stop recording.

Note

：

If a channel is recording, closing preview will give rise to stopping it

6.2 Schedule Record

In the control panel, click “Area & Camera Settings”
under Device to enter the interface.

Select a camera and click “Local Record of Device” as

shown on the right figure.

Enable

Schedule

Record

and

set

schedule

and

pre-recording time, record duration, etc.

Click “Local Record of System” as shown on the right

figure.

Under record of system , you can choose record stream and
set record schedule.

Note:

Please refer to section 3.2.2 for details.