COP-USA NVMS 1000 - Manual (Page 14)

11
NVMS-1000 User Manual
 View Device Log
Click “View Device Log” to enter the interface.
Choose the type of system logs; enter start time and enter
time to search the log information of the device.
 View Disk Information
Click “View Disk Information” to check the detail
information of disk from the list.
 Change Network Configuration
Click “Change Network Configuration” to enter the
interface. You can change HTTP port, Server port; network
address, etc.
Note: If changing the port and IP address there, the network
will disconnect. Then you need to accordingly change the
port and IP address of the device connecting the
NVMS-1000.
 Alarm Input Trigger and Schedule Configuration
Click “Alarm Input Trigger and Schedule Configuration”
to enter the interface. Select a sensor corresponding to the
alarm input; choose a type and holding time for it. You also
can set trigger alarm or other configurations.