COP-USA NVMS 1000 - Manual (Page 41)

38
NVMS-1000 User Manual
 Alarm Link Setup
In the interface of Alarm Management, choose a sensor and
click button to enter the interface.
If checking “Trigger Alarm Playback”, there will be a
sound like ―beep‖ when sensor alarm is triggered.
 Add Associated Preview Camera
Click to pop up a window; check
cameras and click
【OK】 button to save the setting. When sensor
alarm is triggered, the alarm preview and e-map preview will pop
up automatically.
Select the added camera, click to
remove the camera.
 Add Associated Record Camera
Click to enter the interface; check the associated cameras and click
【OK】 button to
save the setting. When the sensor alarm is triggered, the selected channels will be recorded automatically.
Select the added camera, click to remove the camera
8.2 Motion Detection Alarm
In the control panel, click “Change Camera Settings”
under Device.
Select a camera and click “Area and Sensitivity” to
enter the interface as right. You can adjust the detection
sensitivity and setup the motion area.