COP-USA NVMS 1000 - Manual (Page 18)

15
NVMS-1000 User Manual
3.3.2 Camera Management
The real-time image will be displayed after selecting a camera. You can setup the parameters of this camera.
 Image Settings
Image settings include image video parameter, image
quality and image display.
Click “Image video parameters” to enter the interface .
① Adjust the brightness, contrast, saturation and
chroma of the image.
② Clicking 【Restore Default】 button will restore the
above parameters to factory default settings.
Click “Image Quality” under Image Settings to enter
the interface.
Choose the device stream, resolution, quality, etc.
according to practical situation.
Click “Image Display” to enter the interface.
①
Create the camera’s name and set up its display
position on the OSD including the time stamp.
② Click【Copy to】button to apply the settings to the
selected channel.
 Record Settings
Click “Record Settings” to enter the interface as shown
on the right.
Under the record of device
① Enable schedule Record.
② Set schedule.
③ Choose pre-recording time, duration and record save
time.
④ Click 【Copy to】 button to save the settings to the
selected channel.