Brookfield DV-I Prime - Manual (Page 6)

Brookfield Engineering Laboratories, Inc. Page 6 Manual No. M/07-022-D0613
The equivalent units of measurement in the SI system are calculated using the following
conversions:
SI CGS
Viscosity: 1 mPa•s = 1 cP
Torque: 1 Newton-m = 10 7 dyne-cm
References to viscosity throughout this manual are done in CGS units. The DV-I PRIME
Viscometer provides equivalent information in SI units.
I.1 Components
Component Part Number Quantity
DV-I PRIME varies 1
Model G Laboratory Stand Model G 1
Spindle Set with Case* varies 1
LVDV-I PRIME set of four spindles (#61 through #64) (SSL)
RVDV-I PRIME set of six spindles (#02 through #07) (SSR)
HA/HBDV-I PRIME set of six spindles (#02 through #07) (SSH)
Shipping Cap* B-30-3Y 1
Power Cord (115V/230V) DVP-65/66 1
Guardleg* (not supplied with HA/HB versions) varies 1
LVDV-I PRIME B-20Y
RVDV-I PRIME B-21Y
Carrying Case DVE-106 1
Operating Manual M07-022 1
Torque Decals T05-1012 1
For cone/plate versions
Spindle wrench CP-23 1
Cone spindle CPE-XX 1
Sample cup varies 1
Standard CPE-44Y
With embedded temperature probe and cable CPE-44PY
The following applies to DV-I PRIME Viscometers with the temperature probe option. Look for
the symbol
Tp throughout this manual for instructions pertaining specifically to DV-I PRIME
Viscometers with temperature probe option.
OPTIONAL ITEMS
RTD Temperature Probe DVP-94Y 1
Probe Clip DVE-50A 1
RTD Cable when supplied with Cone/Plate version SC4-61Y 1
Please check to be sure that you have received all components and that there is no damage. If
you are missing any parts, please notify Brookfield Engineering or your local Brookfield agent
immediately. Any shipping damage must be reported to the carrier.
* Not supplied with Cone/Plate version.