Setting the date and time, Start/mil, Setting your iogo – Panasonic KX-F560 User Manual
Page 8: Setting your logo, Сюсюоз, Сю сю cd, Initial preparation, Сьфсю, Cpcpcl)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Initial Preparation
Before using your unit, program the following features first.
•The current date and time (see below)
•Your logo {see below)
•Your facsimile telephone number (see page 10)
This information will be printed on the top of each page transmitted from your unit.
Setting the date and time
The interna! clock of the unit will show the date and time on the display and print them on the top line of all
fax messages you transmit.
IMENUl
I
О
Press
MENU.
1.SYSTEM SET UP
сюсюоз
Press #, then 01.
SET DATE
8c
TIME
О
START/mil
О
Press
START/SET.
—The display will show
a date and time.
ОСЮ CD
сЬсЬсю
сЬфсю
своею
©
Enter the correct
month/day/year/hour/
minute by selecting each
2 digits. Then press *
for AM or press # for PM.
Example: Aug. 10 1995, 3:00PM
Press 08 10 95 03 00, then press # for PM.
Press
START/SET
to
store the setting.
Press
MENU
to end the
program.
Note:
•
When you make a mistake while programming, press the STOP button, then make the correction.
•
The accuracy of the clock will be approximately ± 45 seconds a month.
Setting your iogo
The logo is used to identify fax messages that are being transmitted by your unit. Usually the logo is a
company, division or personal name in an abbreviated form.
iMENUj
1
О
сю сю CD
0
START/fSETl
О
Press
MENU.
1.SYSTEM SET UP
Press #, then 02.
YOUR LOGO
Press
START/SET.
LOGO =
cpcpcl)
(фс1)(Ю
свсюсю
Enter your logo up to
30 characters by
following the instructions
on page 9. (The preset
logo will be cleared.)
Press
START/SET
to
store the setting.
Press
MENU
to end the
program.
8