Changing the journal auto print, Setting the transmission report printing – Panasonic KX-F560 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6. Advanced Operations
Changing the journal auto print
The unit will automatically print the journal report after every 35 fax communications. See page 46 for a
sample of this report. After printing, the journal memory will be erased and only subsequent activity will be
recorded.
When this feature is deactivated, the unit will store the records of the last 35 fax communications, but the
unit will not print the journal report automatically.
To change the setting, proceed as follows.
O
~~
Press
MENU.
e
1.SYSTEM SET UP
Press #, then 22.
AUTO JOURNAL
Press
START/SET.
MODE=ON [ A T ]
0
©
Press
A
or
T
to select
the desired mode.
Press
START/SET
to
store your selection.
Press
MENU
to end the
program.
Setting the transmission report printing
You can select one of the following choices. See page 46 for a sample of this report.
ERROR:
The transmission report will be printed out only when the transmission fails.
ON:
The report will always print out, indicating whether the fax transmission is successful or not.
OFF:
The report will not be printed.
o
Press
MENU.
1.SYSTEM SET UP
Press #, then 04.
TX-REPORT MODE
s
TART/fSETl
O
Press
START/SET.
MODE = ERROR[ AT]
©
Press
A
or
T
to select
the desired mode.
Press
START/SET
to
store your selection.
Press
MENU
to end the
program.
45