Remote fax receiving using an extension, Using an extension phone, Changing the remote fax activation code – Panasonic KX-F560 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. Advanced Operations
Remote fax receiving using an extension
If you have an extension phone connected to your facsimile unit or on the same line, it is possible to receive
a fax message into your facsimile unit. Using an extension phone, press the remote fax activation code.
This saves you the trouble of going to the facsimile unit and pressing the START button.
Important:
•
To activate this feature, use a touch tone telephone as the extension phone.
• The remote fax activation code is set to
"as a
pre-selected setting. This code can be changed as
below.
Using an extension phone
Extension
/
To the same line
To EXT. jack
/
To LINE jack
^ When a call comes in, lift the handset of the
extension phone.
0
When:
—document reception is required, or
—a slow beep is heard, or
—no sound is heard,
press -X-* (remote fax activation code).
o
Replace the handset in the cradle.
—The facsimile unit will activate the fax
function to receive documents.
Changing the remote fax activation code
This code can be from 1 to 4 digits in length using the numbers 0 through 9 or the character -x.
(e.g.
123, 123*)
Important:
•
The remote fax activation code should be different from the remote TAM activation ID (see page 21) and
should not be set to “0000".
IMENUI
I
О
O C D C D
e
START/[SETÌ
О
Press
MENU.
1.SYSTEM SET UP
Press #, then
41.
REMOTE FAX ACT.
Press
START/SET.
CODE=**
©
фс1зф
ффсю
фф®
START/fSETÌ
О
IMENUI
I
О
Enter the new code
number.
Press
START/SET
to
store the number.
Press
MENU
to end the
program.
37