Delayed transmission, Press start/set, Press start/set to – Panasonic KX-F560 User Manual
Page 36: Cdcdcii
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. Advanced Operations
Delayed transmission
This unit can send fax documents automatically at a specific time. This will allow you to take advantage of
low-cost calling hours offered by your telephone company.
Delayed transmission can be programmed up to 24 hours in advance.
o
® CDO
Insert
the
documents
FACE DOWN until a
beep tone is heard.
Press MENU.
1.SYSTEM SET UP
Press #, then 25.
DELAYED XMT
Press
START/SET.
MODE = OFF [AT
Press
A
or
T
to select
“ON”.
MODE=ON
AT
—If this feature is not
required, select "OFF”
Press
START/SET.
N0.=
©
cpcpcp
CD®CD
CDObCE)
CDCDcIi
CDCi)®
Enter the phone number
using one-touch dialing,
speed dialing or a full
number.
Press
START/SET
to
store the number.
—When using speed
dialing, press
START/SET again.
TIME=12:00AM
Enter the transmission
start time.
Example:
11:00PM
Press 1100, then press #
to select PM.
—To select AM, press -X-.
Press
START/SET
to
store the setting.
Press MENU to end the
program.
—When the
programmed time has
come, the unit will
automatically start
transmission.
Note:
•
If there is no answer or the line is busy, the unit will automatically redial the number (see item 7 on
page 56).
•
You can receive, transmit and copy documents while the delayed transmission is set.
•
If the programmed start time occurs during a power failure, delayed transmission will be attempted soon
after power is restored.
• When transmit polling (see page 35) is set to ON, delayed transmission is not available.
•
You can use the electronic telephone directory to enter a phone number (see page 34).
36