Raihi mts broadcast/ vhs hi-fi stereo system, Mts stereo and sap broadccist, Mts stereo hroadccist – Panasonic OMNIVISION PV-4661 User Manual
Page 22: Sap hr€>adca8t, Mono broa^ast, Receivable broadcast types
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
raiHI MTS Broadcast/ VHS Hi-Fi Stereo System
Check list before you begin
^ The VCR IS connected to a stereo TV, or a mono TV and stereo amp or receiver with speakers
_] The VCR and other components are plugged in and turned on
When recording, you may monitor in
stereo, by connecting the VCR to
either a stereo TV, or a mono sound
TV with stereo amp and speakers
DISPLAY
Equipped with dhx *TV Noise Reduction
for true MTS reproduction
dbx
-TV
Noise Reduction is required for good
stereo separation and audio fidelity
dbx^ IS a registered trademark, and is
licensed by
dbx
Technology Licensing
Receivable Broadcast Types
The following are possible broadcast types with their accompanying on-screen
displays The signal(s) not being received is enclosed in parenthesis The
currently selected audio mode is indicated with an arrow To change the audio
mode for listening to, or recording these broadcasts, follow the steps on page 23
DISPLAY
Ó
Push DISPLAY to display the broadcast
signal currently being received on-screen
MTS Stereo and SAP broadccist
Multi-channel Television Sound Stereo
(main language) and Second Audio Program
(second language) broadcasts are being
received simultaneously Select the STEREO
or SAP audio mode as desired.
MTS Stereo hroadccist
Multi-channel Television Sound Stereo
broadcast is being received
SAP hr€>adca8t
Second Audio Program (second language)
broadcast is being received Select SAP
audio mode for the second language
MONO broa^ast
Normal monaural sound broadcast is
being received
• If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results
STOP 12
00
AM WNET
0 00 00
STEREO
SLP
SAP
MONO
STOP 12 00AM WNET
0 00 00
STEREO <-
SLP
(SAP)
MONO
STOP
(STEREO)
SAP
i
MONO
12 00AM WNET
0 00 00
SLP
STOP
12
00
AM
(STEREO)
(SAP)
MONO ■€-
WNET
00 00
SLP
When recording, the currently selected broadcast sound is always recorded
on the left and right Hi-Fi tracks as well as the normal monaural track This
means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs
22