Panasonic OMNIVISION PV-4661 - Manual (Page 12)

One Tíme VCR Setup (continued)
WHEEL
CH UP
ADD/DELETE
To Change On Screen Display Language
1
Push MENU to display the menu.
Rotate the Wheel to select the
language selection item.
(English: LANGUAGE, Spanish:
IDIOMA, French: LANGUE).
MENU
SET UP VCfi
SET
clcx : k
SET UP CHANNEL
ENGLISH IDIOMA/UVNGU
SELECT : ПОТАТЕ WHEEL
SET ; PUSH WHEEL
ЕГО : PUSH MENU KEY
S Push the Wheel to change the language.
• Each Push will change the language in the order shown.
cl English------► Spanish- French
□
4
Push MENU to exit this mode.
To Replace Channels in Memory
Example, if you have cable installed, etc.
1
Push MENU to display the menu.
Use the Wheel to select
SET UP CHANNEL from menu,
and then to set your antenna
system (TV or CATV).
Rotate and push the Wheel to
select and set AUTO SET.
• To exit this mode, push MENU.
• If you use a cable box, turn on
the cable box and set it to the
PBS channel in your time zone.
4
Push CH UP to start Channel
Auto Set.
• Auto Clock Set is always
performed when replaced
channels in memory.
....................... MENU .........................
SET UP CHANNEL
ID10МА/ LANGUE:ENGLt SH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
--- SET UP CHANNEL ---
: CATV
AUTO SET
CABLE/DSS BOX SET UP
VCR PIUS+ CH SET UP
SELECT : ROTATE WHEEL
SET : PUSH WHEEL
END : PUSH MENU KEY
OlANNEL/aOCKAUTOSET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
To Set or Reset the Clock
In case the clock is wrong, or
a power failure occurred.
1
Push MENU to display the
menu.
2
Rotate and push the Wheel to:
(A) Select SET CLOCK
(B) Select MANUAL SET
(C) Set the date, time, and
D.S.T. (Daylight Saving
Time).
3 Push MENU twice to start the
clock and exit this mode.
....................... MENU .........................
SET UP VCR
BSjEES
SET UP CHANNEL
10 lOUA/ LANGUE: ENGL I SH
SELECT
SET
END ROTATE WHEEL
PUSH WHEEL
PUSH MENU KEY
SET CLOCK
AUTO SET
SELECT
SET
END
ROTATE WHEEL
PUSH WHEEL
PUSH МИЛ! KEY
-\Hy- CLOCK....................................
OSTrON
BY ROTATING WHEEL
«-PUSH CLEAR: :PUSH WHEEL-»
TO START PUSH MENU KEY
To Add or Delete a Channel
1
Select a channel using the
NUMBERED keys.
2
Push ADD/DLT to add or
delete the channel.
CHANNEL 08 DELETED
lot
ADDED
To select a deleted channel, use the NUMBERED keys
on the remote control. Deleted channels will flash in the
Multi Function Display on the VCR when selected.
When Using the 100 key
When selecting CATV channels 100 to 125 with the
NUMBERED keys, first push the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Push NUMBERED keys 100, then 2, then 5.
This VCR will accurately maintain its calendar up to Dec. 31,2014,11 ;59PM.
Normal TV or Cable ciiannels are automatically selected and placed in memory depending on how your VCR is hooked up.
By pushing the Wheel or CLEAR button repeatedly, you can skip forward or badtward over correct entries and go directly
to a specific item.
12