Special vcr features, Check list before you begin, Press action – Panasonic OMNIVISION PV-HD1000 User Manual
Page 32: Press action twice to exit, Hold down rec/rime, Press at to select “beeper," and then press, Weak signal display feature, Vcr lock feature, Warning beeper feature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Special VCR Features
[^c
Check list before you begin.
□ All connections are made. (See pages 6~11.)
□ D-VHS VCR is plugged
in.
n TV is turned on and set to the D-VHS VCR channel
(CH 3 or 4).
• Some screens shown here may not be displayed
during digital playback.
REC/TIME
WEAK SIGNAL DISPLAY Feature
You may choose whether or not you want the VCR to display a solid
blue screen when the broadcast signal is very weak or nonexistent.
Press ACTION'
the menu.
to display
Press Ay
to select “SET
UP VCR,”
and then
press
► to display the
“SET UP VCR” screen.
Press
AT
to select
“WEAK SINGAL DISPLAY,’
and then press
^ to
select “ON” or “OFF.”
--------------- MENU ---------------
SET CLOCK
SET UP CHANNEL
SELECT
SET
END
A T KEY
A KEY
ACTION KEY
r:------------ —-m
------ ur vvn
REPEAT PU^Y
OFF
BEEPER
ON
WEAK SIGNAL DISPLAY»
OFF
SELECT:* ▼ KEY
SET ;► KEY
END : ACT ION KEY
When “OFP is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “ON" is selected, the picture
is displayed regardless of the signal condition.
The picture can not always be seen clearly when
“ON” is selected.
Press ACTION twice
to exit.
NOTE
When the VCR is connected to a Combination
VCR which has a Blue Back feature, even if
the VCR Blue Back is set to “ON” on the VCR,
the screen will go to blue back.
VCR Lock Feature
When activated, this feature prohibits all operations
except for timer recording and tape eject. This
feature may be used to keep young children from
operating the D-VHS VCR.
VCR LOCK ACTIVATED
Hold down REC/riME
on the D-VHS VCR
without a cassette
inserted
for 7
seconds
during Power
On mode.
• “NO CASSETTE PLEASE INSERT A CASSETTE” is
displayed when REC/TIME is pressed. Please
disregard this warning and continue to hold down
REC/TIME for 7 seconds.
• If an invalid key is pressed when this feature is
activated, "HOLd" is displayed in the Multi Function
Display for 5 seconds.
• DTV Timer Recoding by the Set Top Box will not be
performed when D-VHS VCR is in VCR Lock mode.
To Cancel the VCR Lock feature,
Repeat above with or without a cassette inserted.
• VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
• In digital playback mode, no indications appear
on-screen.
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each
time an invalid entry or incomplete operation is made.
A
Press ACTION
to display the
menu.
B Press
AT
to select “SET UP
VCR,"
and then press
► to
display the “SET UP VCR” screen.
--------------- MENU ---------------
SET CLOCK
SET UP CHANNEL
SELECTS T KEY
SET :► KEY
END : ACT I ON KEY
Press
AT
to select
“BEEPER,"
and then press
► to select “ON” or “OFF.”
Press ACTION twice
to exit
this screen.
---------- SET UP VCR - ..........
REPEAT
play
OFF
ON
WEAK SIGNAL DISPLAY :OFF
SELECT:* ▼ KEY
SET :► KEY
END :ACT 1 ON KEY
32