Panasonic PV-4760 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PV-4760
5
Press the AUDIO OUT
6
Press PLAY Button.
7
Press STOP Button to
SELECT Button
stop playback.
according to desired
# P. 37 (TO PLAYBACK)
audio channel.
(See page 25.)
TRACKING CONTROL
0
A certain amount of "noise" interference may
appear in the picture image when a VHS video
tape recorded on one VCR is played back on a
different VCR.
You may adjust the TRACKING CONTROL (UP
or DOWN), on your VCR to minimize this noise.
The normal position is set when a cassette tape
is inserted.
TO ADVANCE A STILL PICTURE
■ During still mode, press the
SLOW Button (or the FRAME
ADVANCE Button on the Remote
Control).
• Franrte advance only operates
while viewing a still picture.
• The picture will slowly advance
frame by frame when this button
is held down.
TO VIEW A SLOW PICTURE
■ During playback, press
the SLOW Button.
■ Press the PLAY Button
to release slow.
SLOW TRACKING CONTROL
SLOWTRACtaMQ
• In 8low4notion playback of tapes
recorded in SP or SLP, SLOW
TRACKING CONTROL on the
Remote Control can be used to
obtain the best possible picture.
The TRACKING CON fROl on
the
VCR can alsr
h i
ui\-d (see abnv^,,
» P.37 (TO PLAYBACK)
- 8 -