Panasonic PV-4760 - Manual (Page 27)

PV-4760
O Select the desired /1 Adjust STEREO C Hold REC Button
O CHANNEL by H TUNER or w In and press PLAY
using the RECEIVER for Button.
CHANNEL UP/ high-quality
DOWN KEYS. sound.
For monitoring
and playback
* » .M VIDEO IN*
* If your TV has VIDEO IN
terminal, you can connect
this line to receive a better
quality picture.
WHEN YOU USE A HEADPHONE
Cable
(not supplied) Cables
(not supplied)
STEREO TUNER or
RECEIVER
Adjust your Headphone’s stereo playback sound by using the Headphones Volume Control, next to the
HEADPHONES Jack (M3), on your VCR.
PLAYBACK WITH Hi-Fi AUDIO SOUND
AUDIO CHANNEL SELECTION
Press the AUDIO OUT SELECT Button to select the type of audio sound and channel
combination you desire to monitor or playback.
ii lilS Hi~Fi [H]li 11
REC LEVEL METER
-E Hi-Fi
Both left and right channels play back recorded signal with Hi-Fi AUDIO
SOUND
E Hi-Fi------Only signal recorded on left channel plays back with Hi-Fi AUDIO SOUND
.p irJ Only signal recorded on right channel plays back with Hi-Fi AUDIO
-Hi-Fi s
SOUND
^-No display- For playback with NORMAL AUDIO (mono) SOUND
• Other operations are the same as “TO PLAY BACK A PRE-RECORDED TAPE’
(page 7).
- 2 6 -