Amera recording – Panasonic PV-4760 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AMERA RECORDING
Your VCR can be used with a camera and optional power supply (PK-A789S) to make your own recordings.
CONNECTION
Make the connections below before turning the VCR and the power supply ON,
1
2
3
4
5
Insert cassette.
Turn on camera
Set INPUT SIGNAL
Set TAPE-SPEED
Hold REC Button in
power supply.
SELECTOR to UNE. SELECTOR
and simultaneously
press PLAY Button
ia
LINE
to start your recording. To
VCR Power comes
t
I
*
-TUNER
to SP, LP, or SLP.
pause the tape use
on automatically.
AUDIO
PAUSE/STILL button on
2CH
the.Remote Control.
I Refer to the Operating Instructions for the camera about adjustments and operating procedures.
TO MONITOR ON TV
The signal being recorded can be monitored on a TV.
The antenna connections on the VCR may remain connected when using a camera.
■ Turn TV ON and select channel 3 or 4.
■ Set the VCR/TV Selector to VCR.
NOTE:
• Should a howling noise (feedback) be heard during monitoring, turn the volume level of the TV down.
• If either AUDIO INPUT L or R Jack is connected, each channel will be recorded with the same sound.
- 2 9 -