Panasonic PV-4760 - Manual (Page 43)

W
ireless remote battery installation
PV-4760
REMOTE CONTROL
TfXMible Corrections
RECORDER cannot be remote
controlled.
Programming buttons, STAND BY
and OTR buttons on remote control
do not work.
• Aim the Wireless Remote Control directly at the remote sensor on
the VCR.
• Avoid all obstacles which may interfere with the signal path.
• Replace or inspect the batteries, (p. 42) '
• Make sure the PROGRAM ON/OFF Switch is set to ON.
OTHERS
Troitiiles Corrscllons
You can’t view programs normally • Set the VCR/TV Selector to “TV", (p. 9)
on TV ...
Vidéo cassette can't be inserted ... • insert the cassette with the window side up and the safety tab
facing you. (p. 3)
Video cassette can't be removed ... • Check that the Power Plug is completely connected to an AC Outlet,
(p. 6)
Video cassette ejects when the OTR, • Check the cassette to be sure that the small tab on the back of
STAND BY, TIMER or REC and
PLAY Buttons are pressed ... the cassette is still intact, (p. 39)
Cleaning care for video heads ...
(a) Video Head Cleaning; Your VCR will not normally require head cleaning: however, it
is possible that the heads may become clogged when playing an old or damaged tape.
It the image on your screen resembles the photograph on the left, while playing back
a tape, the heads may require cleaning.
(b) Cleaning the Heads: It is recommended that head cleaning be performed by a qualified
V 4 ,„' service technician. Please contact your nearest Panasonic Service Center. An alternate
Clogged Video Head solution is to obtain a head cleaning cassette. There are many types of cleaning
cassettes, so be sure to follow the cleaning instructions carefully, excessive use of the cleaning cassette could
shorten head life. Use this cassette only when a head clogging symptom occurs.
LOAD THE BATTERIES AS FOLLO\A^S:
BATTERY REPLACEMENT CAUTION
The Wireless Remote Control is powered by two “AA” size batteries. The life of the batteries is about a year
although this will depend on the number of times the unit is used. Replace or inspect the hatte.ries once a year.
• Load the new batteries with their polarities (© and ©) aligned properly.
• Ho not heat, disassemble 6^ ;iio.'>-c";'jit >he C't battpiies.
*> If you do not intend to use the Hemoie Control for u long period ot time, remove iho batteries and store them
in a cool, dry place.
• Remove spent batteries immediately and dispose of them.
• Do not mix old and new batteries. (Also never mix alkaline batteries with manganese batteries.)
- 4 2 -