Playback a pre-recorded tape – Panasonic PV-4760 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To
PLAYBACK A PRE-RECORDED TAPE
See “Simple Playback Steps” in the Table of Contents on P.2 for all sections related to this operation.
You may also want to refer to the separate "Basic Guide For VCR Connections”.
1
2
3
4
Connect VCR output
Connect AC Power
Turn TV ON, select
Insert cassette.
to TV Antenna Input.
♦ P. 3 (PLAYBACK
CONNECTION)
cord to wall outlet.
Channel 3 or 4 on the
TV.
(Set to match the VCR
Power comes on.
• If a cassette is already in
the VCR, press the
Channel 3/4 Switch,
POWER Button ON.
details page 3.)
SPECIAL EFFECTS PLAYBACK (BEST RESULTS AT SP & SLP SPEED)
TO RAPIDLY LOCATE A
PARTICULAR SEGMENT
Press the SEARCH Button tor
desired direction.
SEARCH SPEED
IN
SP
about 5 times normal
speed.
IN
SLP
about 17 times normal
speed.
s
Press SEARCH Button once
more for playback.
TO VIEW A DOUBLE SPEED
PLAYBACK PICTURE
■ During playback, press the PLAY
Button again on the VCR.
■ Press PLAY once more to release the
tape from a doiArle speed playback.
• If the double speed playback picture
contains noise, adjust the TRACKING
CONTROL (UP or DOWN) to obtain
the best possible picture.
G
3
TO VIEW A STILL PICTURE
■ Press PAUSE/STILL Button. .
Press once more to release the
tape from pause/stiil mode.
These special effects are activated during playback, during their operation the audio is muted.
- 7