Panasonic PV-4760 - Manual (Page 20)

T
imer recording
(
continued
)
SET THE RECORDING LENGTH SET THE CHANNEL TO BE RECORDED
6 Press LENGTH Buttons (UP/DOWN) to set the
recording length.
(The recording length may be selected from 0:00
to 8:00 in 15 minute units.)
Press CHANNEL UP/DOWN Keys to set the
channel.
• If your VCR is connected to a cable system
through a cstole converter box, the VCR
CHANNEL is set to the output channel of the
converter box and the channel to be recorded
is set on the converter box selector.
TV DISPLAY
vPrOiw sTAm iGTH CM „Py0(« STMT IGTH CM
^1-fRl P12:00 0:D0 »
4
5
8
7
- 1^Ht Pii;06 liti 36
3
4
5
e
7 W
WIRELESS REMOTE CONTROL
CD CD
CHANNEL
4, 5
6
10
FOR ADDITIONAL PROGRAMS RETURN TO NORMAL DISPLAY TIMER SET MODE
8 Press PROGRAM Button to
select the next program by
repeating step 2 and then
repeating steps 3~7.
Press OSD Button to n^ease
ON SCREEN DISPLAY mode
and return to reception on TV..
When OSD is not being :
,
used: (If step 1 is skipped)
Press NORMAL Button.to
return to normal mode.
10
P 0(W START IGTH C m
P)i:06 1:15 11
-J^AI All ;30 0:60 31
4
i
«
i*
current
program
Set TIMER Button ON and
turn TV OFF.
- . • TIMER Indicator “ nTi^TIl ”
appears.
• There is no need to press
the REC and PLAY
; Buttons.
vrvy if the cassette tab is
missing, tape will be
. ejected and the
CASSETTE-IN Indicator
“ CD ** and “ nm " will
flash as a warning that the
cassette tab is missing.
AFTER THE TIMER RECORDING HAS TAKEN PLACE
■ Set TIMER Button OFF.
• Unit will return to normal operation.
- 1 9 -
NOTE: When not using the OSD and HELP
buttons place the PROGRAM ON/
OFF Switch in the OFF position to
prevent misoperation.