Panasonic KX-FP105 - Manual (Page 83)

Error Messages
Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message Cause & Remedy
CALL SERVICE
• There is something wrong with the unit. Contact our service personnel.
CHECK COVER
• The cover is open. Close it.
CHECK DOCUMENT
• The document is not fed into the unit properly. Reinsert the document. If
misfeeding occurs frequently, clean the document feeder rollers and try again
{p. 94). If the problem remains, adjust the feeder pressure (p. 91).
CHECK FILM
The film cartridge is not installed. Install it (p. 92, 93).
CHECK MEMORY
• Memory (telephone numbers, parameters, etc.) has been erased. Re-program.
CHECK PAPER
• The recording paper is not installed or the unit has run out of paper. Install paper
and press [START/SET/COPYl to clear the message.
• The recording paper is not fed into the unit properly or has jammed near the___
recording paper entrance. Clear the jammed paper and press [START/SET/COPY1
to clear the message (see “When paper has jammed near the recording paper
entrance” on page 90).
Do not install folded or heavily curled paper in the paper tray.
FAX IN MEMORY
• The unit has a document in memory. See the other displayed message
instructions to print out the document.
FAX MEMORY FULL
• Memory is full of received document due to a lack of recording paper or a
recording paper jam etc. Install paper or clear the jammed paper.
• When performing memory transmission, the document being stored exceeds the
memory capacity of the unit. Transmit the entire document using manual or
automatic transmission.
X
o
■Q
FILM EMPTY
• The film is empty. Replace the film cartridge (p. 92, 93).
• The film is slack. Tighten it (see step 4 on page 93) and install again.
The remaining film can print about 15 pages of letter size document. Prepare
new film cartridge (p. 14).
FILM NEAR EMPTY
FREE FILM EMPTY The free starter film is empty. Replace the film cartridge (p. 92, 93).
JOG-DIAL FULL
• There is no space to store new stations in the JOG DIAL directory. Edit or erase
unnecessary stations (p. 35).
LOADING ERROR
A loading error occurred while receiving data from FaxSav. Contact FaxSav
at 1 -888-332-9728.
MEMORY FULL
When making copy, the document being stored exceeds the memory capacity of
the unit. Press iSTOPi to clear the message.
MODEM ERROR
• There is something wrong with the modem circuit. Contact our service personnel.
For assistance, call 1-800-435-7329.
(continued)
83