Multiple stations, Press [directory program, Press [start/set/copy – Panasonic KX-FP105 User Manual
Page 56: Ibroadcasti, Stop, Jog dial, Start/set/copy] [ lower ] [directory program), Sending faxes multiple stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sending Faxes
Multiple stations
This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or JOG DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial keys 1, 2 or 3).
Important:
• Before programming, make sure that the desired telephone numbers have been stored into the One-Touch
Dial or JOG DIAL directory.
• The BROADCAST keys can be used as One-Touch Dial keys 1,2 or 3 or as broadcast keys. These functions
cannot be used at the same time.
Programming the BROADCAST keys with telephone numbers
1
2
3
Press [DIRECTORY PROGRAM].
Display:
PRESS STATION
OR USE JOG-DIAL
Press one of the [BROADCAST] keys.
DIAL MODE
▼A
Press (▼) or [
a
] to select “BROADCAST.
Example:
BROADCAST 1
TA
Press [START/SET/COPY].
DIR=
0 0 0 ]
Enter the station.
a: Using the One-Touch Dial:
For stations 1-3 which are not used as
[BROADCAST] keys, press the preset
One-Touch Dial key.
For stations 4-6, press [LOWER], then press
the preset One-Touch Dial key.
Example:
DiR=Luke
001
b: Using the JOG DIAL directory:
Rotate [JOG Dl/^] until the desired name is
displayed.
Example:
John
001
]
Press [START/SET/COPY ].
Example:
DIR=John
[
0 0 2 ]
• To enter other stations, repeat this step (up to
20 stations).
Press [START/SET/COPY ] after entering
all of the desired stations.
REGISTERED
I
PRESS STATION
OR USE JOG-DIAL
To program another BROADCAST key,
repeat steps 2 to 6.
Press [DIRECTORY PROGRAM] to exit
the program.
®/®
IBROADCASTi/
One-Touch Dial keys
.o
□
CD®® ^
®®® ^
®®®^
®®® O C
E
[STOP]
D
o
[JOG DIAL]
[ START/SET/COPY] [ LOWER ]
[DIRECTORY PROGRAM)
Note:
• If you make a mistake while programming,
press [STOP], then make the correction.
• Confirm the stored numbers by printing a
broadcast list (p. 95).
56