Panasonic KX-FP105 - Manual (Page 38)

Viewing the Caller ID list on the display
The unit stores the caller’s information and makes a list of up to 35 callers in chronological order.
When the memory is full and the unit receives a new call, the oldest data will automatically be erased.
With the Caller ID list, the following convenient features are available.
— Viewing who has called you on the display (See below.)
— Dialing a telephone number from the list (p. 39)
— Storing a telephone number for automatic dialing from the list (p. 40)
— Printing out a Caller ID list (p. 95)
Caller ID_______________________________
1
2
3
Press [CALLER ID SEARCH I.
Example: 2 NEW CALLS
Display: USE JOG-DIAL
Rotate [JOG DIALl to search the Caller ID list (see
below).
If you want to know the caller’s phone number and
the date/time of the call, press (NAME/TEL NO.]
repeatedly while the display is showing the desired
name.
• The display will alternate the name, number and
date/time by pressing [NAME/TEL NO.).
WENDY ROBERTS
I
345-3809
Mar. 14 02:30PM
Press [ stop ) to exit the Caller ID list.
Note:
• If the caller’s name and number cannot be
received, the following message will be
displayed.
Display: NO name rcvd
Ex. When you search from the most recent call/oldest call
From the oldest call:
---► (rotating to the left)
2 NEW CALLS
From the most recent call:
—► (rotating to the right)
END
Reviewed calls
H
MIKE TIMAR
WENDY ROBERTS
i] New calls
ALLAN STONE
END OF NEW CALL
Note:
• To move between calls, rotate [JOG DIAL).
• The display will show “END OF NEW CALL" after the last new call in the list.
• The display will show “END” after the last call in the list.
• If the display shows “NO CALLER DATA” and a beep sounds, the Caller ID list is empty.
38