Panasonic KX-FP105 - Manual (Page 23)

Setup
Date and time, your logo and facsimile
telephone number
You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991,
Your logo Your facsimile telephone number Date and time
Example:
FROM : Panasonic Fax FAX NO. : 1234567 Feb. 26 1999 04:02PM Pi
Fax Correspondence
Setting the date and time
u
*0
(D
■o
0)
S
5'
1
Press (MENU].
Display:
2 Press @, then [Ô) [T].
1.SYSTEM SET UP
SET DATE & TIME
Press ÎSTÀRT/SËT/COPŸ]
M: 01/D:01/Y:99
'— Cursor
Enter the correct month/day/year by selecting
each 2 digits using the dial keypad.
Example: Aug. 10, 1999
Press (Sdl [US] S(B-
M:08/D:10/Y:99
Press [START/SET/COPY].
TIME: 12:00AM
Enter the correct hour/minute by selecting
each 2 digits using the dial keypad.
Press @ to select “AM” or “PM”.
Example: 3:15PM
1. Press SSfTIfs].
TIME: 03:15AM
2. Press @ until “PM” is displayed.
TIME: 03:15PM
Press [START/SET/COPY].
SETUP ITEM [ ]
8 Press [MENU].
Note:
• You can enter the number by rotating
(JOG dial ] in steps 4 and 6. In this case,
press (g to move the cursor.
• The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
• Press (3 01' (B to move the cursor to the
incorrect number, then make the correction.
• If you press [STOP] while programming, the
display will return to the previous one.
23