Setting the play timer, To release the timer function, To check what has been programmed – Panasonic RXDS05 User Manual
Page 52: To enjoy play after programming: (after step 7), Using the timer at the same time every day, To stop the timer in mid-operation, Setting the recording timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Play
Timer
(Continued)
To release the timer function:
(only when the unjt is on)
Press TIMER and clear the timer play dis
play.
The timer does not operate- but the time
setting is stored in the memq|y.
To
check
what
has
been
pro
grammed:
Press .CHECK/-ADJUST (TiMER).
The dispiay changes automatically as fol
lows;
1. Programmed time
2. Programmed source
3. Volume level during operation
To enjoy play after programming:
(after step 7)
1. Start playing the desired sound source.
2. After play, turn the unit off before timer
play starts.
Even if you change the volume level or
sound source, whatever was programmed is
restored at the wake-up time.
Using the timer at the same time
every day:
First check that TIMER appears on the dis
play and then turn the unit off. Hi
To change the source and volume for the
timer function;
Press TIMER to turn off the “TIMER” display,
and then perform steps 5 to 8 on page 50.
To stop the timer in mid-operation:
Turn the unit off.
The timer will not operate if the unit is on.
□
Lights.
Se enciende.
S'allume.
r
.J
I
I
C
D-on
-J
l—U
I I
DC-DU ■“