Usteni/ìff to the radio, Listening to the radio, When fm stereo reception is too noisy – Panasonic RXDS05 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Usteni/ìff to the
Radio
FOR EUROPE
Press BAND to display “LW”
“MW” or “FM”.
LW^MW-^FM
—I
c
(The display changes each time the
button is pressed.)
I FOR AREAS EXCEPT EUROPE |
Press BAND to display “AM” or
“FM”.
AM^FM—I
c
(The display changes each time the
button is pressed.)
2
Press + or - to select the sta
tion.
+: The frequency is increased.
The frequency is reduced.
Keep + or - depressed until the fre
quency
display
starts
to
change.
A
station
with
good
reception
is
auto
matically
selected
and
the
selection
process
then
stops
(Automatic
tuning).
To stop automatic tuning;
Press -F or - again.
For your reference:
With
automatic tuning, the tuning may stop
without a station having been tuned in when
interference
is
encountered
on
neighboring
airwaves. In such a case, tune in a station by
tapping -F or -.
Pressing BAND on the main unit will auto
matically
turn
the
unit
on
and
receive the
broadcasts
which
is
previously
tuned
(only
when AC power is supplied).
When FM stereo reception is
too noisy
D
(Available only from the remote control)
Set the sound to the monaural mode to re
duce the noise.
Press FM MODE.
The “I MONO I” display appears.
To return to stereo sound, press FM MODE
again to turn off the “i
mono
i
” display.
(To be continued)