Yamaha HTR-6080 - Manual (Page 90)

Remote control features
Controlling this unit a TV, or other components
■ Controlling this unit
Set the operation mode selector to ® AMP to control this
unit.
■ Controlling a TV
Set the operation mode selector to ®TV to control your
TV. To control your TV, you must set the appropriate
remote control code for DTV/CBL or PHONO (see
page 88). When you set the remote control codes for both
DTV/CBL and PHONO, priority is given to the one set for
DTV/CBL,
■*1
-*1
Notes
”1 These buttons always control this unit regardless of the
operation mode selector position.
*2 These buttons control this unit only when the component
operation mode selector is set to ® AMP.
Notes
"I These buttons always control yotirl’V regardless of the
operation mode selector position.
Remote control Digital TV/Cable TV
TV POWER Turns ihe power on or oil.
TV VOL +/.
Increases or decreases the volume
level.
TV CH +/ Changes the channel niimher.
TV MUTE Mutes the audio output.
TV INPUT Changes the input source.
*2 These buttons control your TV only when the operation mode
selector is set to ®TV. For dettiils, see the "Digital TV/Cable
TV" column on page 87.
86 En