Sound field programs, Selecting sound field programs, Notes – Yamaha HTR-6080 User Manual
Page 46: Sound field program descriptions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sound field programs
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or niulti-channel sound source. This unit is also equipped with a Yamaha digital sound field processing
(DSP) chip containing several sound field programs which you can use to enhance your playback experience.
• The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
tictual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the renections coming from
the front, back, left and right.
Iiaianu
Selecting sound field programs
Rotate the ©PROGRAM selector (or set the
operation mode selector to ® AMP and then
press one of the sound field selector buttons (®)
repeatedly).
The name of the selected sound field program appears in
the front panel display and in the OSD.
Notes
' Sound field programs cannot be selected when the component
connected to the MULTI CH INPUTjacks is selected as the
input source (see page 38).
' When you play back Dl'S 96/24 sources with any sound field
program, this unit applies the selected program without
activating the D'fS 96/24 decoder.
' Sampling frequencies higher than 48 kHz are sampled down to
48 kHz or lower and then sound field programs are applied.
' When the sampling frequency of the input sources arc higher
than 96 kHz, this unit does not apply any sound field programs.
■ When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
Sound field program descriptions
z'ti!-.
Select a sound field program based on your listening preference, not merely on the name of the program, etc.
CINEMA DSP
Remote control
Category of the Name of the Created sound
or
button
program
program
fields
HiFi DSP
©
C O J
Ttii;, program clearly reprodueer (he tinelyr eiaboraLed sautid design of the latest sedetjee riedttn and speeia] eiieets-ieatunng nntvies.
You cat! enjoy a variety oi cineniatographjcally crettied virtual spaces reprttduced with dear separation between dialog, stmnd elTeoLs and
baekgrOLitid nrusic.
DSP LEVEL
P.INIT. DLY
P.ROOM SIZE
S.ÌNIT. DLY
S. ROOM SIZE
SB INI. DLY
SB ROOM SIZE
DIALG. LIFT
Available sound field parameters (see page 63)
Program description
Sound field indicators
Surround left
sound field
Presence sound field
. Listening position
c o >
Surround right
sound field
Surround back sound field
42
En