Advanced sound configurations, Changing sound field parameter settings, Note – Yamaha HTR-6080 User Manual

Page 65

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced sound configurations

Changing sound field parameter

settings

You can enjoy good quality sound with the initial factory

settings. Although you do not have to change the initial

factory settings, you can change some of the parameters to
better suit the input source or your listening room.

Note

You cannot change the sound field parameter values when

•‘MEMORY GUARD” in -‘OPTION MENU” is set to -‘ON” (see
page 83). If you want to change the sound field parameter values,

set -‘MEMORY GUARD” to "OFF”.

Turn on the video monitor connected to this

unit.

Set the operation mode selector to ® AMP

and then press ©DISPLAY on the remote
control.

The follow'ing status screen appears in the OSD.

' SIRIUS

UQL" “4iF . 0dB

r y o

IKPUD

JIE

r-'f- i

DUD

H.SEU!

HI6HTJ

HDHI

O F F

Press one of the sound field program

selector buttons (©) repeatedly to select the
desired sound field program you want to
adjust.

Press

©A

to select the desired sound

field parameter and then ®<3 /1> to change
the selected sound field parameter value.

Cursor

• For details about the function and control range of each

sound field parameter, see page 63.

• When you set a sound field parameter to a value other than

the initial factory settings, an asterisk mark appears by
the sound field parameter name in the OSD.

• The ¿ivailable sound field parameters for some of the

sound field programs may be displayed on more than one

• If you press and hold ® <1 /1> to change the sound field

parameter value, the initial factory settings are shown
momentarily in the front panel display.

• Use the "PARAM. !N!’^ feature in '’OPTION MENU‘S to

initialize the parameters of each sound field program
within a sound field program group (see page 83).

• Yoti can select the atnotmt of time that the current status is

displayed in the OSD by using the "OSD-AMP" parameter

in ’’OPTION MENU” (see page 82).