Yamaha HTR-6080 - Manual (Page 37)

Selecting the SCENE templates
This unit is equipped with 18 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE
template
SCENE template library
(Image)
Assign the
SCENE
template to the
SCENE button
Selecting the desired SCENE
template
Rotate the ©INPUT selector (or set the
operation mode selector to ® AMP and then
press @<3 /1>) to select the desired
template.
Press the ©SCENE (or ©SCENE) button
again to confirm the selection.
The selected SCENE template is assigned to the
SCENE button.
Front panel
Remote control
Notes
• If you do not carry out any operation within 30 seconds
from the last, operation in these steps, this procedure is
automatically canceled.
• Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you need to set the input
source of the SCENE template on the renfote control. See
page 85 for details.
1
Press and hold the ©SCENE (or ©SCENE)
button for 3 seconds.
The indicator on the seleeted SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
3 seconds
Front panel
\
Remote control
Flashes
33 En