Resetting the system, Notes – Yamaha HTR-6080 User Manual
Page 105
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the system
Use this fetitiire to reset all the parameters of this unit to the initial factory settings.
Notes
■ This procedure completely resets all the parameters of this unit including the “SET MENU“ parameters. However, the advanced setup
menu parameters will not be initialized.
■ The initial factory settings are activated next time you turn on this unit.
To cancel the initialization procedure at any time without making any changes, press
®STANDBY/ON
on the front panel to set this
unit to the standby mode.
1
Press
(Q)STANDBY/0N
on the front panel to
set this unit to the standby mode.
2
Press and hold
©TONE CONTROL
and
then press
©STANDBY/ON
to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
TONEcomROL
While holding
down
3
Rotate the
©PROGRAM
selector to select
“PRESET”.
4
Press
©TONE CONTROL
repeatedly to
select “RESET”.
Select “CANCEL“ to cancel the initialization procedure
without making any changes.
5
Press
©STANDBY/ON
to confirm your
selection and set this unit standby mode.
101
En