Yamaha HTR-6080 - Manual (Page 81)

Customizing this unit (MANUAL SETUP)
Maximum volume H m H UOL::
Lise this feature to set the maximum volume level of this
unit. This feature is useful to avoid the unexpected loud
sound by mistake. For example, the original volume range
is 16.5 dB to ^80.0 dB. However, when “MAX VOL.” is
set to -5.0 dB, the volume range becomes
-5.0 dB to -80.0 dB.
Control range: 16.5 dB, 15.0 dB to -50.0 dB
Control step: 5.0 dB
Notes
• When this unit is in the auto setup procedure, the volume level
is automatically set to 0 dB regardless olThe current “MAX
VOL.” setting.
■ The “MAX VOL.” setting takes priority over the initial volume
setting. For example, if “IN!.VOL.” is set to -20.0 dB and
“MAX VOL.” is set to-30.0 dB, the volume level is
automatically set to -30.0 dB when you turn on the posver of
this unit next time.
Initial volume I !■■! I = i...i0i... =
Use this feature to set the volume level of this unit when
the power of this unit is turned on.
Choices:
Off, -80.0 dB to 16.5 dB
Control step: 0.5 dB
Note
The "MAX VOL." setting lakes priority over the "INI.VOL."
setting.
■ HDMI setting SET
Use this feature to select the component to play back
HDMI audio signals.
Support audio SUF-'F'ORT HUD 10
Use this feature to select whether to play back HDMI audio
signals on this unit or on another HDMI component connected
to the HDMI OUT jack on the rear panel of this unit.
Choices:
HTR-6080, OTHER
• Select “HTR-6080” to play back HDMI audio signals
on this unit. The HDMI audio signals input at the
HDMI IN jacks of this unit are not output to the HDMI
component connected to the HDMI OUT jack on the
rear panel of this unit.
• Select “OTHER” to play back HDMI audio signals on
another HDMI component connected to the HDMI
OUT jack.
Note
The HDMI video signals input at the HDMI IN 1 or HDMI IN 2 jack
of this unit are always output at the HDMI OUT jack of this unit.
■ Extended surround decoders
Use this feature to enjoy 6.1/7.1-channel playback for
multi-channel sources using the Dolby Pro Logic Ilx,
Dolby Digital EX or DTS-ES decoders by using the
connected surround back speakers.
Mode 11 ODE
Use this feature to select the mode of the decoder driving.
Choices: AUTO. ON. OFF
• Select “AUTO” to activate the optimum decoder to
play back the signal in 6.1/7.1 channels when a signal
flag that can be recognized by this unit is input.
• Select “ON” to play back multi-channel sources using
the selected decoder type in “TYPE”.
• Select “OP'F'” not to use the decoders to create 6.1/7.1
channels.
Decoder type ! VP!E
SOUHti HEHl)
DEXTD SUR.
........ ON
■PLI:.:Uouie
]JU p /Down
]"S.eleci
Use this feature to select the decoders used to play back
multi-channel sources when you select “ON” in “MODE”.
Choices: PLIIxMovie, PLllxMiisic, EX/ES, EX
• Select “PLIIxMovie” to play back Dolby Digital or
DTS signals in 7.1 channels using the Pro Logic Hx
movie decoder.
• Select “PLllx Music” to play back Dolby Digital or
DTS signals in 6.1/7.1 channels using the Pro Logic Ilx
music decoder.
• Select “EX/ES” to play back Dolby Digital or DTS
signals in 6.1/7.1 channels using the Dolby Digital EX
or DTS-ES decoder.
• Select “EX” to play back Dolby Digital or DTS signals
in 6.1/7.1 channels using the Dolby Digital EX
decoder.
77
En