Yamaha HTR-6080 - Manual (Page 79)

Customizing this unit (MANUAL SETUP)
■ Speaker distance C)SFM)iSTfiHCI:E
Lise this feature to manually adjust the distance of each
speaker and the delay applied to the respective channel.
Ideally, each speaker should be the same distance from the
main listening position. How'ever, this is not possible in
most home situations. I’hus, a certain amount of delay
must be applied to the sound from each speaker so that all
sounds will arrive at the listening position at the same
time.
Unit UNIT
Choices: meters (m), feet (ft)
Initial setting:
[U.S.A. and Canada models]; feet (ft)
[Other models]; meters (m)
• Select “meters” to adjust speaker distances in meters.
• Select “feet” to adjust speaker distances in feet.
Speaker distances
Control range: 0..3() to 24.00 m (1.0 to 80.0 ft)
Confrol step: 0.10 m (0.5 ft)
Initial setting:
front L/FRONT r / center / swfr / sur . L/SUR, R/
PRNS L/PRNS R: 3.00 m (10.0 ft)
SB L/SBR: 2,10 m (7,0 ft)
SP DISTANCE Adjiistod speaker
IdEiEiHT L. Proni left speaker
FRiJriT R From right speaker
CIEi-iTiEIR Center speaker
SW!"F; Subwoofer
iEUR:= i... Surround left speaker
iEUfC: R Surround right speaker
ÌEB !... Surround back left speaker
SB IR Surround back right speaker
IdRHS !,... Presence leli: speaker
prì - ie ; ir Presence right speaker
■ Equalizer CclEiiUHLJjZEtR
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer type seiect EEQ Tvi-d:; EilELiEi;:!
Use this feature to select the type of equalizer.
Choices: AUTO PEQ, CENTER GEQ, EQ OFF
• Select “AUTO PEQ” to use the parametric equalizer
adjusted in “AUTO SETUP” (see page 28),
• Select “CENTER GEQ” to adjust the built-in 5-
frequency band graphic equalizer so that the tonal
quality of the center speaker matches that of the front
left and right speakers. Press ®
A
/
V
to dtspkty the
graphic equalizer screen.
• Select “EQ OFF” to deactivate the equalizing feature.
Note
When you carry out “AUTO SETUP” in advance (.see page 28),
“AUTO PEQ” is automatically selected as the default selling.
Test tone "HE:Ei T
Use this feature to make adjustments for “CENTER GEQ”
while listening to a test tone.
Choices:
OFF, QN
• Select “OFF” to stop test tones and output the currently
selected source component.
• Select “ON” to output test tones from the center and
front left speakers.
Notes
■ The available speaker channels differ depending on the selling
of the speakers.
■ Instead of “SB L” and “SB R”, “SB” is displayed if “SUR.B L/
R SP” is set to either "SMLx I “ or “LRGx I” (see page 73).
75
En