Yamaha HTR-6080 - Manual (Page 31)

Connections
(g) Multi-information display
Shows the name of the eiiiTent sound field program and
other information when adjusting or ehanging settings.
ig) SLEEP indicator
Lights up while the sleep timer is on (see page 41).
ig 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit,
g) Input channel and speaker indicators
E][^[
r
)'
. LFE indicator
•Presence speaker indicators
■Input channel indicators
" Surround back speaker indicators
LFE indicator
Lights up when the input signal eontains the LFE
signal.
Input channel indicators
Indicate the channel components of the eurrent digital
input signal.
Presence and surround back speaker
indicators
Light up according to the number of presence and
surround back speakers set for “EXTRA SP ASSIGN”
(see page 72) and “SUR.B L/R SP” (see page 73) in
“SOUND MENU” when this unit is in the auto setup
(see page 28) or the speaker level setting in “SOUND
MENU” (see page 74) procedure.
'4'i
You can make settings for surround back speakers automatically
by running "AUl’O SETUP” (sec page 28) or manually by
adjusting settings for “SUR.B L/R SP” (see page 73) in
“SOUND MENU”.
To use the presence speakers, set “EXl'RA SP ASSIGN” to
“PRESENCE” (see pages 29 or 72).
Using the remote control
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Remote control sensor
Infrared window (®)
Outputs infrared contntl signals. Aim this window at the
component you want to operate.
(v)TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
Operation mode selector (®)
The function of some buttons depends on the operation
mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 87).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 86).
Notes
■ Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
■ Do not leave or store the remote control in the following types
of conditions;
- places of high humidity, sueh as near a bath
- pliiees of high temperatures, such as near a heater or stove
- pkices of e.xtremely knv temperatures
- du sty places
• To set the remote conlrttl codes for other eontponents, see
page 88.
27
En