Yamaha HTR-6080 - Manual (Page 21)

Connections
Audio and video signai flow
■ Audio signal flow
Notes
■ 2-channel as well as mulli-channel PCM, Dolby Digital and
DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be
output at the HDMI OLJTjack only when "SUPPORT AUDIO”
is set to "OTHER” (see page 77).
• Audio signtds input at the HDMI IN jacks are not output at the
AUDIO output and DIGITAL OUTPUT jacks.
Video signal flow
Notes
■ When the analog video iignals are input at the COMPONENT
VIDEO, S VIDEO and VIDEO jacks, the priority order of the
input signals is as follows;
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
■ Digital video signals input at the HDMI IN I or HDMI IN 2
jack cannot be output from analog video output jacks.
• The analog component video signals with
480i (NTSC)/576i (PAL) of resolution are converted to the
S-video or composite video signals and output at the S VIDEO
MONITOR OUT and VIDEO MONITOR OUT jacks.
■ This unit does not accept analog cttmponent video signals with
lOSOp of resolution.
• The OSD signal is not output at the VCR OUT and DVR OUT
jacks and is not recorded.
• Use the ^‘HDMI UP-SCALING" parameter in ’‘DISPLAY SET"
to deinterlace and convert the resolution of the video signals
output at the HDMI OUT jack ( sec page 81).
17 En