Yamaha HTR-6080 - Manual (Page 84)

Customizing this unit (MANUAL SETUP)
■ Volume Trim C)U0L..U!lE TFilfl
Use this feature to adjust the output level of each input
source. This is useful if you want to balance the level of
each input source to avoid sudden changes in volume
when switching between input sources.
Choices: XM, TUNER, PHONO, CD, MD/CD-R, DVD,
DTV/CBL, VCR, DVR, V-AUX, DOCK,
MULTI CH
Control range; -6.0 to 6.0 dB
Contatl step: 0.5 dB
Initial setting: 0.0 dB
■ Multi channel input settings
Use this feature to set the function of the multi channel
input.
You tan adjust the value for DOCK only when iPod is stationed
to the Yamaha Universal Dock eonnetled to this unit.
The default name (“DVD” in the display example above) and
the new name (“MY DVD”) of the selected input source
appears in the OSD.
■ Decoder mode DfDEiCuDEJf IIODE:
Decoder select mode
Use this feature to designate the default decoder mode for
the input sources connected to the DIGITAL INPUT jacks
when you turn on the power of this unit.
Choices:
AUTO, LAST
• Select “AUTO” to if you want this unit to
automatically detect the type of input signals and select
the appropriate decoder mode.
• Select “LAST” to if you want this unit to automatically
select the last decoder mode used for the connected
input source.
DTS decoder prioritize setting
Choices: AUTO, DTS
• Select “AUTO” if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select “DTS” if you want this unit to select Dl’S as the
input mode.
BGV EiGU
Use this feature to select the video source played in the
background of the sources input from the MULTI CH
INPUT jacks.
Choices: DVD, DTV/CBL, V-AUX, DVR, VCR, LAST,
OFF
• Select “LAST” to set this unit to automatically select
the last selected video source as the background video
source.
• Select “OFF” to set this unit not to play the video
source in the background.
Input channels INPUT CH
Use this setting to select the number of channels input
from an external decoder.
Choices:
6CH. 8CH
• Select “6CH” if you input 6-channel signals.
• Select “8CH” if you input 8-channel signals.
Front input FdiiONT
IHF'UT HENU
CH set
BGU............ L.fi:3T
INPUT CH............... 8CH
FRONT-■■ DUD
i iJp.-'Down
[■4]/[i^-];S0leui
[f you selected “8CH” in “LNPUT CH”, you can select the
analog jacks at which the front signals from an external
decoder w'ill be input.
Choices: CD, .MD/CD-R,
DVD, DTV/CBL, V-AUX,
DVR, VCR
fiji'
See page 22 for the connection information.
Note
The “FRONT” parameter appears only when you set “INPUT
CH” to “8CH”.
80
En