Yamaha HTR-6080 - Manual (Page 77)

Customizing this unit (MANUAL SETUP)
Woofer section of a speaker is 16 cm (6.5 in) or larger: large
Woofer section of a speaker is smaller than 16 cm (6.5 in): small
Front speakers f-"FiOHT
Choices: SMALL, LARGE
SOUND HEHLI
FF:0HT bP
§ 9
U p m [^1
illRL.L > l . rr : ge
When the front speakers are large
Select “LARGE” (large).
When the front speakers are small
Select “SMALL” (small).
Note
When “LFE/BASS OUT” is set to “FRNT” (.see page 72), you
can select only “LARGE” in “FRONT SP”. If the value of
“FRONT SP” is set to a setting other than “LARGE” in advattce,
this unit automatically changes the value to “LARGE”.
Center speaker CENTIEFi SF-'
Choices: xNONE, SML, LRG
When the center speaker Is large
Select “LRG” (large).
When the center speaker Is small
Select “SML” (small).
When you do not use the center speaker
Select “NONE” (none). The center channel signals are
directed to the front left and right speakers.
Surround left/right speakers
Choices: NONE, SML, LRG
When the surround speakers are large
Select “LRG” (large).
When the surround speakers are small
Select “SML” (small).
When you do not use the surround speakers
Select “NONE” (none). This unit is set to the Virtual
CINEMA DSP mode (see page 46), and “SUR.B L/R
SP” is automatically set to “NONE”.
Surround back left/right speakers
Choices: INONE, SMLxl, SMLx2, LRGxl, LRGx2
SCIUHD HEHLI
biJR.[ bP
S B
i/
bm
\
I’IL n I Sr-tL;:<2 L,r
When the surround back left and right
speakers are large
Select “LRGx2” (large x 2).
When the single surround back speaker is
large
Select “LRGxl” (large x 1).
When the surround back left and right
speakers are small
Select “SMLx2” (small x 2).
When the single surround back speaker is
small
Select “SMLxl” (small x 1).
When you do not use the surround back
speakers
Select “NONE” (none). The surround back channel
signals are directed to the siirroimd left and right
speakers.
73
En