Yamaha HTR-6080 - Manual (Page 70)

Advanced sound configurations
Sound field parameter Features
2 sk‘ivo djiVL'i. Bypasses the decoders ¿ind the DSP processors of this unit for pure hi-fi
stereo sound when playing 2-channel analog sources.
Choices: AUTO. OFF
' Select ”AUTO’’ to bypass the decoders, the DSP processors and the lone control circuitry only
when "BASS" and "TREBLE’' are set to 0 dB (see page 48).
' Select "OFF" not to bypass the decoders, the DSP processors and the tone control circuitry
w'hen "BASS" and "TREBLE" are set to 0 dB.
' When multi-channel signtils (Dolby Digital and DTS) tire input, they are downmixed to 2
channels and output from the front left and right speakers.
' The low-frequency signals of the front left and right channels are redirected to the subwoofer
in the follow'ing cases:
- "LFE/BASS OUT" is set to "BOTH" (see page 72).
- "FRONT SP" is set to "SMALL" (see page
73) and "LFE/BASS OUT" is set to "SWFR"
(see page 72).
Fcl'"j i Ste
{" 1 ¡'"'i
{
r‘‘0("j
ijri
ijri
7-channel stereo center, surround left, surround right, surround back, presence left and presence
right levels. Adjusts the volume level of each chcinnel in the 7-channel stereo mode. The
available parameters differ depending on the setting of the speakers.
1 j j.M
j
"I j
j i:::'!
: j I
i I'» {
¡¡::ri
¡¡::ri
¡¡::ri
Control range: 0 to 100%
V|"‘ i'"| i F}'''i!'''i
i 0пС' €'Г*
2-channel and 7-channel Compressed Music Enhancer effect level. The high-frequency signals
of some sources may be emphasized loo much. In this case, set the effect level to "LOW".
Choices: HIGH, LOW
■ Select "HIGH" for a high effect level.
■ Select "LOW" for a low^' effect level.
■ Selecting decoders used with sound
fieid programs (Decoder Type)
Use this feature to select the desired decoder used with
MOVIE sound field programs (except “Mono Movie”).
See page 45 for details about MOVIE sound field
program.
Available decoders
Selecting decoders
Decoder Functions
1 Г| |"j'j‘
Dolby Pro Logic processing for any
sources.
F'LI Ix llovie
F'LI I rlDuie
Dolby Pro Logie fix (or Dolby Pro
Logic II) processing for movie
sources. The Pro Logie IIx decoder
is not available when “SUR..B L/R
SP” is set to “NONE” (see page 73).
N€'D" F, !21|'"иЕ'Гьн DTS processing for movie sources.
■ Selecting decoders for 2-channel
sources (surround decode mode)
Use this feature to play back sources with selected
decoders. You can play back 2-channel sources on multi­
channels.
Set the operation mode selector to ®AMP and
then press @SUR. DECODE repeatedly on the
remote control to select the desired surround
decoder.
You can select from the following modes depending on the
type of source you are playing and your personal
preference.
You can change the decoder parameter settings. Press
igiDISPLAY and then ®/\ / V repeatedly on the remote control
to select the desired decoder parameter. You can change the value
of the selected parameter by pressing ©<1 / repeatedly on the
remote control.
66 En