Resetting the factory presets, Press standby/on to confirm your selection – Yamaha HTR-5830 User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RESETTING THE FACTORY PRESETS
If you want to reset all of your unif s parameters for any
reason, do the following. This procedure completely
resets ALL parameters, incliiditig the SET MENU, level,
assign, and tuner presets.
Be sure this unit is in standby mode.
(U.S.A. model)
¥
. 1
STANDBY/ON STEREO (EFFECT)
With the unit in standby mode, hold down
STEREO (EFFECT) on the front panel and
press STANDBY/ON.
“PRESET” appears in the front panel display.
If you are using Asia and General model, press
PROGRAM <1 /O to select “PRESET”.
To cancel the initialization procedure without making any
changes, press STANDBY/ON.
Press STEREO (EFFECT) to select the
desired setting.
! T fkS! 'L. r
To reset the unit to its factory presets.
To cancel without making any changes.
Press STANDBY/ON to confirm your
selection.
If you selected "RESET", the unit is reset to its
factory presets and switches to standby mode.
If you selected "CANCEL", the unit sw'itches to
57