Yamaha HTR-5830 - Manual (Page 29)

PLAYBACK
Select a sound field program if desired.
Press PROGRAM <1 /O (or press AMP to select the
AMP mode, then press one of the field program
buttons repeatedly on the remote control).
See pages 30 - 37 for details about sound field
programs.
Front panel
JAZZ ROCK iUrtiniSIMilEIJT
o © o o
MUSiO 1\J THTR MOVIE-'
’ or O O 0
ES/DTS MIGHT 6.1/S.T _____
Remote control
■ Playing video sources in the background
You can combine a video image from a video source with
a sound from an audio source. For example, you can
enjoy listening to classical music while having beautiful
scenery from the video source on the video monitor.
Use the input selector buttons to select a video source,
then select an audio source,
CD MD/CD-R TUWER
o
‘»y/CBL VCFI V-AUX
To mute the sound
■ Selecting the 6CH INPUT
Press 6CH INPUT until “6CH INPUT” appears on the
front pane! display.
Qy
Front panel Remote control
6 C H I N P U l
Note
If “6CH INPUT” is shown on the front panel display, no other
source can be played. To select another input source, first
]iress 6CH INPUT so that -‘6CH INPUT” disappears from the
front panel display.
Press MUTE on the
remote control.
“MUTE” blinks on the front
panel display.
To resume audio output, press
MUTE again.
• You can also cancel mute by pressing VOLUME +/-, etc,
• You can adjust the muting level (see page 4.“i),
■ Night listening mode
This mode reproduces dialogue clearly while reducing the
volume of loud sound effects for easier listening at low'
volumes or at night.
Press NIGHT on the
remote control. (oT
The NIGHT indicator in the
front panel display lights up.
Press NIGHT once more to
return to nonnal reproduction.
vl/
-i|)-
• You can use night listening mode with any of the sound field
programs.
• Night listening mode may vary' in effectiveness depending on
the input source and surround sound settings you use.
■ When you have finished using this unit
Press STANDBY/ON (STANDBY on the
remote control) to set this unit in standby
mode.
Front panel Remote control
25